Shenyang solver supercritical extraction equipment co. LTD
Your current location: Home >> The printing equipment >>

The printing equipment

The printing equipment

  • Taxonomy:The printing equipment

  • Click times:
  • Date of release:2018/10/30
  • inquiry
  • introduce

The printing equipment

The printing equipment


Process flow of supercritical CO2 printing and dyeing equipment: the CO2 is heated and pressurized to a supercritical fluid state that is neither gas nor liquid, which is continuously cycled between the dye tank and dyeing tank by the circulation pump. The supercritical CO2 fluid is stained on the fabric while dissolving the dye. Dyeing conditions is 20 ~ 30 mpa, 80 ~ 160 ℃, dyeing time 1 h or so, after completion of dyed residual dyes and CO2 recovery and recycling.

Supercritical carbon dioxide is non-toxic, easy to get, low cost and pollution-free, and its application in the printing and dyeing industry can effectively reduce the degree of environmental pollution. The entire printing and dyeing process is the same as the traditional method, only supercritical carbon dioxide replaces the solvent to dissolve the dye. After the printing and dyeing, there is no need to treat the waste liquid, but only to reduce the working pressure. Carbon dioxide turns into gas, and the remaining dye can be recycled and reused. In the production system, carbon dioxide is also recycled for the next printing and dyeing, and the whole process is completely environmentally friendly.





The address of this article:http://www.sy-tc.com/en/product/567.html

Key word:Carbondioxideextraction,Aerogelequipment,Supercriticalfoamingequipment

last:None
next:None

Recently, browse:

  • Service
  • number
    13080818838
  • Message
  • M
    e
    s
    s
    a
    g
    e
    Please leave a message for us
    Please input the message here, and we will contact you as soon as possible.
    name
    Contacts
    Telephone
    Telephone
    mailbox
    mailbox
    address
    address